Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S570 - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S570:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 13 g/10min ISO 1133
Temperatura 260 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.6 % ISO 294-4, 2577
ASTM Data
Indice di fluidità a caldo, MFI 11 g/10min ASTM D 1238
Temperatura 260 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.006 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 64 MPa ISO 527
Deformazione a rottura 41 % ISO 527
Modulo a flessione, 23°C 2530 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 47 kJ/m² ISO 180/1A
ASTM Data
Resistenza alla trazione di snervamento 64.1 MPa ASTM D 638
Allungamento a rottura 40 % ASTM D 638
Modulo a flessione 2480 MPa ASTM D 790
Resistenza alla flessione 86.2 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 690 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 96 °C ISO 75-1/-2
Reazione al fuoco 5V a spess. h 5VB class IEC 60695-11-20
Spessore provato 2.5 mm -
Yellow Card disponibile sì - -
ASTM Data
UL 94 combustibilitá V-0 - UL 94
Spessore testati 1.52 mm -
DTUL a 66 psi 110 °C ASTM D 648
DTUL a 264 psi 97.8 °C ASTM D 648
Temp.di rammollimento Vicat 114 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1190 kg/m³ ISO 1183
Densità 1190 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Ritardante di fiamma, Senza alogeni
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.